QuickBooks requires that you reboot loop error generally occurs when you try to install any update. Sometimes due to some technical glitch, an update did not get finished and this error is encountered. It appears on the screen with a warning message stating QuickBooks requires that you reboot loop when installing an update for QuickBooks. This issue can remain unresolved after the system is rebooted. As for other common errors, this error isn’t common. Resolving QuickBooks requires that you reboot loop error can be a risky task for QuickBooks users. When this error occurs, you get stuck in a loop where you try to do the same thing back to back but nothing works.

QuickBooks Requires That You Reboot Loop

However, to help you to overcome this error we have curated this article with the potential solutions. So, stick to this article till the last. Also, in case you are seeking further assistance you can contact our support technicians at our toll-free hotline +1-844-539-0188. 

Also Read: Fix QuickBooks Desktop Keeps Crashing Error 

Overview of QuickBooks Requires That You Reboot Loop Error 

To get an understanding of this issue we have come up with the scenario in which you may be facing this error. 

  • You might have run the installation process after downloading it from QuickBooks and run it as admin.  
  • Then you started installing the VC9 vc_redist x86/x64 without issue. 
  • This happens when an error message pops up suddenly when the request to reboot your system appears. 
  • You will then press Yes even it is showing the same error on the window. 
  • The installer gets started on its own from here and the process keeps on repeating. 
  • But if you press the No tab the prompt appears on the screen to reboot. The system will show that the installation was interrupted and you have to start from the initial. 

What are the Causes of QuickBooks Requires That You Reboot Loop Error? 

Here is a list of the causes that might trigger this error.  

  • If your hard drive is corrupte or damage this error can occur. 
  • The QBWUSER.ini file is missing or damaged. 
  • In case you have selected a lengthy company file name. 
  • QuickBooks is not installed properly. 
  • The operating system you are using is incompatible or outdated. 

Some Important Points to Consider 

Before moving towards the troubleshooting process, you should keep in mind a few points stated below: 

  • Update QuickBooks to the latest version. 
  • Suppress the QuickBooks software. 
  • Turn off the hosting on the specific system. 
  • Change the .ND and .TLG file names if they are too lengthy. 
  • Make sure there is no other issue going on with your software already. 

Also Read: How to Rename the Qbprint.qbp file in QuickBooks Desktop?

Quick Fixes to Fix QuickBooks Requires That You Reboot Loop Error 

You can try applying these steps as the easiest way to fix this issue quickly.  

Note: You must have access to the admin account to fix this issue to use the steps mentioned below. 

  • Log in to Windows with an admin account. 
  • Go to the Start menu and select the Control Panel. 
  • Click on Programs and turn Windows features on or off. 
  • Now turn on the .Net Framework 3.5. 
  • Then reboot your system 
  • Now the .NET Framework is required for the QuickBooks installer to install new updates. 

Methods to Resolve QuickBooks Requires That You Reboot Loop Error 

A few steps can help you resolve this issue immediately. We have listed 8 DIY steps below.  

Method 1: Use a Company File Located on Another Location 

  • Firstly, click on the Windows + E tab to open Windows Explorer. 
  • Then search for files with extension .QBW. 
  • Now right-click on the file and select copy. Then go to the C: drive and create a new folder with the name QBTEST and paste the file into that folder. 
QBTest folder in QUickBooks QuickBooks Requires That You Reboot Loop
  • Now hold the CTRL button and open QuickBooks and then open the copied company file. 
  • This will resolve your issue and if this doesn’t work move to the next step. 

Also Read: How to Locate Missing Transactions in QuickBooks Desktop?

Method 2: Run QuickBooks in Selective Startup Mode 

  • Press the Windows + R to open the Run command. 
  • Now type MSConfig in the search bar.
msconfig - QuickBooks Requires That You Reboot Loop
  • Click on the OK tab to open the system configuration screen. 
  • Next, select the Boot mode in the General tab and choose a billing system service. 
quickbooks selective startup mode
  • Then go to the Service tab and hit Hide all Microsoft services. 
  • After this, you have to select the Disable All option and clear the Hide all Microsoft services checkbox. 
Hide all Microsoft services
  • Make sure that the Windows Installer checkbox option is selected in the list of offered services. 
  • Now click on the OK button and click the Restart tab on the system configuration screen. 
  • Try to reinstall QuickBooks again and then switch back to normal startup mode. 

Method 3: Use Quick Fix My Program Feature 

  • First of all, close the QuickBooks and get the updated QuickBooks Tool Hub version. 
  • After this, save the files in a favorable location and double-click on the downloaded file. 
  • Now install QuickBooks Tool Hub and agree to the terms and conditions and then open it. 
  • In tool hub select the Programs Problem tab and choose Quick Fix My Program feature. 
Run Quick Fix my Program
  • Then start with your QuickBooks and open the data files. 
  • Finally, restart the system and check if the error persists. 

Method 4: Use QuickBooks Install Diagnostic Tool 

  • Open the QuickBooks Tool Hub program and go to the Installation Issues tab. 
  • Select the QuickBooks Install Diagnostic Tool and perform the scan. 
QuickBooks install diagnostic tool - QuickBooks Requires That You Reboot Loop
  • Once the problem is detected apply the required steps to resolve it. 
  • Now restart your system to save changes and check for the error. 

Method 5: Turn on the .NET Framework 

  • Log in to Windows as Administrator and go to the Start menu. 
  • Select the Control Panel and click on the Programs tab. 
  • Next turn the Windows features on or off. 
  • Now enable the .NET Framework 3.5 and restart the system. 
  • QuickBooks installer requires .NET framework to install any new updates. So, after enabling this the installer will successfully install the software without showing any error. 

Method 6: Create a New Windows Administrator User 

You can try to create a new user in QuickBooks to fix such an error. The steps involved in here are:

  • Open the Control Panel and double-click on the Manage users. 
Control panel RUn command
  • Now click on the Add tab. 
  • After this, enter your name and admin domain, and then click the OK button. 
Create a new Windows Admin User
  • In case you are using Windows 10, select Admin. 
  • Now click on the Finish tab to enter the User Accounts dialog box. 
  • Finally, click on the OK button to end the process. 

Method 7: Repair the QuickBooks Desktop Installation 

  • Press Ctrl + Alt + Del to start the process and select Task Manager. 
  • Now press the Processes option and right-click on any of the QuickBooks Processes. 
  • After that click on End Process.
  • Then a confirmation message will pop up asking: Are you sure to end the process, you have to click Yes and try to run the same task again. 

Method 8: Edit the Permission of the Temp Folder 

  • Press the Windows key and type %temp% in the search bar. 
Type TEMP and hit on Enter
  • Now right-click on the Windows temp folder and select Properties. 
  • Then select the Security tab and click on the Edit option. 
  • Furthermore, enter your Windows username. 
  • Select the Full Control Checkbox in the permission column and click on the OK button. 
Windows Permissions for Common Files - QuickBooks Requires That You Reboot Loop
  • Finally, reinstall QuickBooks and check if the error continues. 

You might find this helpful: How to Set up folder and Windows Access Permissions to Share Company Files?


At the end of this article we hope that you can resolve QuickBooks Requires That You Reboot Loop error. After going through the whole section now you are aware of the steps to be applied. However, in case you still encountering the error and still getting any problems immediately contact our experts. You can contact our experts via live chat support or by dialing our helpline number i.e. +1-844-539-0188

Frequently Asked Questions 

Why does QuickBooks get stuck in a reboot loop? 

Software conflicts, corrupted files, or incomplete update issues can cause QuickBooks to get stuck in a reboot loop. 

How can I quickly fix a reboot loop error in QuickBooks? 

To fix a reboot loop error, restart your computer, run the QuickBooks Repair Tool, update QuickBooks, or reinstall your software. 

Will reinstalling QuickBooks fix the reboot loop issue? 

Reinstalling QuickBooks may resolve reboot loop issues caused by corrupted installation files or settings. However, be sure to back up your data before proceeding. 

What tools can I use to fix QuickBooks installation errors or missing components? 

QuickBooks install diagnostic tool resolves problems that occur while installing QuickBooks software. This tool helps in properly determining and diagnosing all kinds of problems. 

Other Related Articles:

QuickBooks Desktop 2024: Download, Features and System Requirements

Intuit Customer File Exchange – Download and Upload Files

QuickBooks Conversion Tool – Move Your Book to QuickBooks

How to Fix QuickBooks Unrecoverable Error?